1.
|
Green House Saving Potential Of A Photovoltaic Thermal Hybrid Solar System For Residential Applications
Rekha L, Dr. Vijayalakshmi M M, Dr. Natarajan E
Assistant Professor, Dept. of Mechanical Engg., GEC,Thrissur-9, Kerala
Professor, Dept. of Civil Engg Sathyabama University, Chennai – 119, India
Professor IES, Department of Mechanical Engineering, Anna niversity, Chennai - 25, India
Abstract
|
|
2.
|
Numerical Simulation Of Hydrogen Sorption In Metal Hydride Based Storage Bed Using Lattice Boltzmann Method
Sneha Murali, Neethu Augustine, Blessin K. B. Mohan G
Center for Computational Research in Clean Energy Technologies,
Sree Chitra Thirunal College of Engineering, Thiruvananthapuram, Kerala, India
Abstract
|
|
3.
|
Wall Roughness Effects On Shock Boundary Layer Interaction Flows
Arun Kumar R, H.D Kim
Research Scholar, IIT Madras Chennai, Tamilnadu, India
Professor, Andong National University Andong, South Korea
Abstract
|
|
4.
|
A Review Of Green Supply Chain Management Issues In Indian Bottledwater Industry
Anoop A.T., Dr. Regi Kumar V.
M.Tech. Scholar, College of Engineering Trivandrum, Trivandrum,Kerala-695016, India
Associate Professor, College of Engineering Trivandrum, Trivandrum, Kerala- 695016, India
Abstract
|
|
5.
|
Cost Of Pollution And Its Control In Pulp And Paper Industry
Ranjith R, Pradeep Kumar P
M.Tech Industrial Engineering & Management, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Assistant Professor, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Abstract
|
|
6.
|
Effect Of Prandtl Number On Heat Transfer In Flow Past A Heated Cylinder
Aswathy Nair. K, Ajith Kumar. S, A. Sameen, S. Anil Lal
Department of Aerospace Engineering, Indian Institute of Technology, Madras Chennai-600036, India.
Department of Aerospace Engineering, Indian Institute of Technology, Madras Chennai-600036, India.
Department of Aerospace Engineering, Indian Institute of Technology, Madras Chennai-600036, India.
Department of Mechanical Engineering, College of Engineering, Trivandrum Kerala-695016, India.
Abstract
|
|
7.
|
Studies On Underwater Vibration Isolation Module
LAL KRISHNA G, Dr. C.G. Nandakumar
Department of Ship Technology, CUSAT, Kochi-22, India
Associate Professor Department Ship Technology, CUSAT, Kochi-22, India
Abstract
|
|
8.
|
Numerical Analysis On Transient Thermal Behaviour Of Charcoal Filters In Nuclear Power Plants
K.N.V.Adinarayana, Seik Mansoor Ali, V.Balasubramaniyan
Safety Research Institute AERB, Kalpakkam, India
Safety Research Institute AERB, Kalpakkam, India
Safety Research Institute AERB, Kalpakkam, India
Abstract
|
|
9.
|
Transient Thermal Analysis & Hot Test Of An Ablative Cooled Thrust Chamber Of Semi Cryogenic Engine
A. P. Baiju, G. Remesh, Dr. V. Narayanan, Raju.P.Thomas, NRV Kartha
Scientist/Engineer 'SF' LPSC/ISRO,Trivandrum, Kerala, India
Scientist/engineer 'SG' LPSC/ISRO,Trivandrum, Kerala, India
Project Director (C25) PSC/ISRO,Trivandrum, Kerala, India
Project Director Semi Cryo Engine LPSC/ISRO,Trivandrum, Kerala, India
Dy Director Cryo Propulsion Entity LPSC/ISRO,Trivandrum, Kerala, India
Abstract
|
|
10.
|
Numerical Studies On Hydraulic Transients During Pump Startup And Coast-Down In An Adiabatic Closed Loop
Seik Mansoor Ali, Ananya Mohanty, Krishna Chandran. R, V. Balasubramaniyan
Safety Research Institute, Atomic Energy Regulatory Board, Kalpakkam – 603 102, India
Safety Research Institute, Atomic Energy Regulatory Board, Kalpakkam – 603 102, India
Safety Research Institute, Atomic Energy Regulatory Board, Kalpakkam – 603 102, India
Safety Research Institute, Atomic Energy Regulatory Board, Kalpakkam – 603 102, India
Abstract
|
|
11.
|
Application of Simulated Annealing in Flow Shop Scheduling
Arjun.K.R Dr. M. S Jayamohan
Assistant Professor, Dept of Mechanical Engineering, Amal Jyothi College of Engg, Kanjirappally, Kerala, India
Professor Dept. Of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Abstract
|
|
12.
|
Linking the Awareness Of Modern PPC Techniques With The Perceivedusefulness Of Forecasting: Empirical Findings From Indian SMES
Anu N S, Aiswarya C A, Biju Augustine P
3rd Semester M.Tech in IEM, Department of Mechanical Engineering, RIT Kottayam, Kerala, India
3rd Semester M.Tech in IEM, Department of Mechanical Engineering, RIT Kottayam, Kerala, India
Associate Professor, Department of Mechanical Engineering, RIT Kottayam, Kerala, India
Abstract
|
|
13.
|
Aerothermal Analysis of Hypersonic Flow around a Cylinder
Reji R V, K S Santhosh, S Anil Lal
Research scholar, Fluid Dynamics Lab, Department of Mechanical Engineering, College of Engineering, Trivandrum, Kerala, India
Assistant Professor, Department of Mechanical Engineering, College of Engineering, Trivandrum, Kerala, India
Professor, College of Engineering, Trivandrum, Kerala, India
Abstract
|
|
14.
|
Performance Evaluation Of Building Having Differenttypes Of Solar Shades
Jerry Davis T, Dr. N Asok kumar
Thermal Science, Department of Mechanical Engineering, College of Engineering, Trivandrum-696016, India
Professor, Department of Mechanical Engineering, College of Engineering, Trivandrum-696016, India
Abstract
|
|
15.
|
Development Of A Mitigation Model For Storage Facility To Reduce The Consequence Of Toxic Release
Soman A.R, Sundararaj.G, Mohan. M
Department of Mechanical Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, 641004 India
Department of Mechanical Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, 641004 India
Central Institute of Agricultural Engineering, Regional Centre, Coimbatore, Tamil Nadu, 641003 India
Abstract
|
|
16.
|
Design, Development And Testing Ofinjector Forsubsystem Development Of Semi Cryogenic Engine Thrust Hamber
G Rohit, M.Kanthasamy, G.Remesh, Dr.V.Narayanan, Raju P Thomas, NRV. Kartha
LPSC, ISRO Thiruvananthapuram, 695003, India
Abstract
|
|
17.
|
Numerical Simulation Of Combustion In A Single Element H2-O2 Cryogenic Engine
Nityananda Sahoo, Bijukumar.K.S, N.Jayan, V.Narayanan, Arnab Roy
Scientist/Engineer Liquid Propulsion Systems Centre Valiamala, Thiruvananthapuram, Kerala, India
Dy Division Head Liquid Propulsion Systems Centre Valiamala, Thiruvananthapuram, Kerala, India
Division Head Liquid Propulsion Systems Centre Valiamala, Thiruvananthapuram, Kerala, India
Group Director Liquid Propulsion Systems Centre Valiamala, Thiruvananthapuram, Kerala, India
Associate Professor, Indian Institute of Technology Kharagpur, West Bengal, India
Abstract
|
|
18.
|
Performance Studies On A Vapour Compression Refrigeration System Using Nano-Lubricant
Subramani.N, Aswin Mohan, Dr.Jose Prakash.M
TKM College of Engineering, Kollam, Kerala, 691005, India
TKM College of Engineering, Kollam, Kerala, 691005, India
TKM College of Engineering, Kollam, Kerala, 691005, India
Abstract
|
|
19.
|
Development of a Delay Analysis System for a railway construction Project
Aswathi R, Ciby Thomas
M.Tech Industrial Engineering & Management Rajiv Gandhi Institute of Technology Kottayam, Kerala, India
Associate Professor and Head, Dept. of Mechanical Engg Rajiv Gandhi Institute of Technology Kottayam, Kerala, India
Abstract
|
|
20.
|
Evaluation of The Contributors Of OEE (Overall Equipment Effectiveness) Using Shapley Value: A Case Study
Rijo Rajan, Sajumon K T
Engineer (Electrical) Construction and Maintenance Group, Vikram Sarabhai Space Centre, Thiruvananthapuram, India
Associate Professor, Dept of Mechanical Engg, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Abstract
|
|
22.
|
Health Monitoring Of Plate Structure Using Piezo Electric Patches And Curvature Mode Shape
N. Jinesh, K. Shankar, N.Ganesan
Assistant Professor, Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Professor, Department of Mechanical Engineering, Indian institute of Technology, Madras, Chennai, India
Professor, Department of Mechanical Engineering, Indian institute of Technology, Madras, Chennai, India
Abstract
|
|
22.
|
A Comparative Study Of Tensile And Microstructural Characteristics Of Friction Welded Joints And Conventionally Welded Joints Of Aluminium Alloy 6061
Baiju Sasidharan, Dr.K.P.Narayanan, Aneesh.K.N
Dept. of Ship Technology, CUSAT Cochin, Kerala ,682 022 India
Dept. of Ship Technology, CUSAT Cochin, Kerala , 682 022 India
Dept. of Mech. Engg., College of Engineering Trivandrum Trivandrum , Kerala 695016 India
Abstract
|
|
23.
|
Surface Roughness Charecterization Using Interference Fringe Analysis
Santhosh Kumar S V, Gopa Kumar S
Dept. of Mechanical Engineering, Government Engineering College Bartonhill, Trivandrum, Kerala-695035 , India
Dept. of Mechanical Engineering, Government Engineering College Bartonhill, Trivandrum, Kerala-695035 , India
Abstract
|
|
24.
|
Improving Competitiveness For A Rubberised Coir Mattress Company Through Cost Optimization
Abdul Rahim A, Dr. M S Jayamohan
Semester IV, M. Tech IEM, Dept. of Mechanical Engineering, Rajiv Gandhi Institute of Technology Kottayam, Kerala, 686501, India
Professor, Dept. of Mechanical Engineering Rajiv Gandhi Institute of technology Kottayam, Kerala, 686501, India
Abstract
|
|
25.
|
Ergonomic Redesign Of A Material Handling Worksystem In A Manufacturing Plant
Raghunathan Rajesh, Rakesh V Babu, Saran Ramachandran
Associate Professor, Rajiv Gandhi Institute of Technology, Kottayam, Kerala - 686501, India
B.Tech (Mech Engg), Rajiv Gandhi Institute of Technology, Kottayam, Kerala - 686501,India
B.Tech (Mech Engg), Rajiv Gandhi Institute of Technology, Kottayam, Kerala - 686501, India
Abstract
|
|
26.
|
Reducing rejection rate of castings using Simulation Model
Binu Bose V, K N Anilkumar
M.Tech Industrial Engineering & Management, Rajiv Gandhi Institute of Technology Kottayam, Kerala, India
Associate Professor , Mechanical Department, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Abstract
|
|
27.
|
An Experimental Investigation on The Enhancement Of Forced Onvection Heat Transfer Using Tio2-Water Nanofluids In Turbulent Regime
Sanjo George C, Krishnakumar T.S.
PG Scholar, TKM College of Engineering, Kollam, Kerala, PIN-691005, India
Assistant Professor, TKM College of Engineering, Kollam, Kerala,PIN-691005, India
Abstract
|
|
28.
|
Experimental Analysis Of A Liquid Desiccant Dehumidifier Using Aqueous Calcium Chloride Solution
Nanda Kishore P.V.R, Dilip D
Former M Tech student, College of engineering Trivandrum, Kerala, India
College of engineering, Trivandrum, Kerala, India
Abstract
|
|
29.
|
Experimental Studies Of Thermal Conductivity, Viscosity And Stability Of Ethylene Glycol Nanofluids
Tony John, T. S. Krishnakumar
T.K.M College of Engineering, Kollam, Kerala-691005, India
T.K.M College of Engineering, Kollam, Kerala-691005, India
Abstract
|
|
30.
|
CFD Analysis of A Flame Deflector With Water Cooling For A Semicryogenic Engine Test Facility
Khalid Rashid, J.C.Pisharady, P.Balachandran
Liquid Propulsion Systems Centre/ISRO, Valiamala, Thiruvananthapuram- 695547, Kerala,India
Liquid Propulsion Systems Centre/ISRO, Valiamala, Thiruvananthapuram- 695547, Kerala,India
Liquid Propulsion Systems Centre/ISRO, Valiamala, Thiruvananthapuram- 695547, Kerala,India
Abstract
|
|
31
|
Comparative Study Of Axial Heat Conduction On The Walls Of A Micro Grooved Heat Pipe
Ramachandran R, S Anil Lal, M R Rajkumar, K.Ganesan
Research Scholar, Anna University, Chennai 600025, 695016 India
Professor, College of Engineering Trivandrum, Kerala, India
College of Engineering, Trivandrum, Kerala, 695016 India
PSG College of Technology, Coimbatore, TamilNadu, 641004 India
Abstract
|
|
32.
|
Development of an Artificial Neural Network Surface Roughness Prediction Model in Turning of AISI 4140 Steel Using Coated Carbide Tool
Sajeev A, Benphil C Mathew, Chindhu C Kaippallil
Professor, Kottayam. Kerala India
Student, Kottayam, Kerala India
Student, Kottayam, Kerala India
Abstract
|
|
33.
|
Evaluation Of Surface Roughness In Aluminium Alloy Using Different Cutting Conditions
Jithin Babu.R, Dr.A.Ramesh Babu
Department of Mechanical Engineering, PSG College of Technology, Coimbatore-641004 India
Department of Mechanical Engineering, PSG College of Technology, Coimbatore-641004 India
Abstract
|
|
34.
|
Assessing The Influence Of The "Awareness Of Modern PPC Techniques" On The "Usefulness of Planning" in SMES
Ganga Gopalan Anisha Mohan, Biju Augustine P
3rd Semester M.Tech in IEM, Department of Mechanical Engineering, RIT Kottayam, Kerala, India
3rd Semester M.Tech in IEM, Department of Mechanical Engineering, RIT Kottayam, Kerala, India
Associate Professor, Department of Mechanical Engineering RIT Kottayam, Kerala, India
Abstract
|
|
35.
|
Layout Planning For Sustainable Development
Gia Elizabeth Abraham , R.Sasikumar
4th Semester M.Tech in Industrial Engineering& Management, Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Professor, Dept. of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Abstract
|
|
36.
|
Measuring Agility Of A Process Plant Using Comprehensive Agility Measurement Tool (CAMT)
Nedhish Somanath, Sabu K., K. V. Krishnanakutty
Professor, Department of Business Adminstration, Lourdes Matha College of Science & Technology, Trivandrum, Kerala-695 574, India.
M.Tech. Scholar, College of Engineering Trivandrum, Trivandrum, Kerala-695 016, India
Assistant Professor, College of Engineering Trivandrum, Trivandrum, Kerala-695 016, India
Abstract
|
|
37.
|
Optimization Of Plant Layout For A State Road Transport Corporation
Keerthi UR, Dr.M S Jayamohan
M.Tech Industrial Engineering & Management, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Professor, Dept. of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Abstract
|
|
38.
|
Influence of Use of Controlling, It Usage, Learning And Training On SME Performance
Firoz N, Divyanjaly C K, Biju Augustine P
3rd Semester M.Tech in IEM, Department of Mechanical Engineering, RIT Kottayam, Kerala, India
3rd Semester M.Tech in IEM, Department of Mechanical Engineering, RIT Kottayam, Kerala, India
Associate Professor, Department of Mechanical Engineering, RIT Kottayam, Kerala, India
Abstract
|
|
39.
|
Optimization of Outbound Logistics System of Acement Manufacturing Company
Jisha P. Sainudeen, Dr. R.Sasikumar, Mr. Antony J.K
M.Tech, IEMRIT, Kottayam-686501, Kerala, India
Professor, Dept of Mechanical Engg RIT,Kottayam-686501, Kerala, India
Assistant Professor Dept of Mechanical Engg RIT,Kottayam-686501, Kerala, India
Abstract
|
|
40.
|
A Methodology to Estimate Thermal Conductivity Using Inverse Method
Maneesh V, Pradeep M Kamath
PG Student , Dept. Of Mechanical Engineering, Govt. Engg College, Thrissur Thrissur,Kerala-680009 India
Asst. Professor, Dept. Of Mechanical Engineering, Govt. Engg Colleg,e Thrissur Thrissur,Kerala-680009 India
Abstract
|
|
41.
|
Numerical Analysis of Two Phase Flow in Flat Heat Pipe
Rakesh Hari, C. Muraleedharan
Research Scholar, Dept. of Mechanical Engineering, NIT Calicut, Kerala, 673601. India
Professor, Dept. of Mechanical Engineering, NIT Calicut, Kerala, 673601. India
Abstract
|
|
42.
|
Effect of Variable Gas Orifice Geometry on Gas-On-Liquid Impinging Injectors
Rakesh P
Associate Professsor, Department of Mechanical Engineering, College of Engineering, Trivandrum, Kerala, 695016, India
Abstract
|
|
43.
|
Numerical Investigation of Effect Of Exhaust Gas Recirculation On Compressionignition Engine Emissions
Aman Kumar Jha, Ashwini Pavgi, Rajavi Yeolekar
Veermata Jijabai Technological Institute, Mumbai, Maharashtra, 400019 India
Veermata Jijabai Technological Institute, Mumbai, Maharashtra, 400019 India
Veermata Jijabai Technological Institute, Mumbai, Maharashtra, 400019 India
Abstract
|
|
44.
|
A HYBRID FRAMEWORK MODEL FOR INDIAN SUPPLY CHAIN COORDINATIONMECHANISM USING FUZZY LOGIC
SREERAG R.S., Dr. REGI KUMAR V.
College Of Engineering, Trivandrum, Kerala, India-695016
Associate Professor, College Of Engineering, Trivandrum, Kerala, India-695016
Abstract
|
|
45.
|
Modelling of Outbound Logistics Barriers of Rubberwood Processing Industries
Avinesh Abraham, R. Sasikumar
M.Tech (Industrial Engg. & Management), Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, India
Professor, Department of Mechanical Engg, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Abstract
|
|
46.
|
Productivity Gainsharing Incentive Scheme for a Spinning Mill Industry
Harikrishnan R P, Pradeep Kumar P
Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Assistant Professor, Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Abstract
|
|
47.
|
Implementation of Six Sigma Methodology in a Blood Bag Manufacturing Company
Deepu Sajeev, Prof.Vinod. M.
M.Tech. Scholar, CET Trivandrum, Kerala-695016, India
Associate Professor, CET Trivandrum, Kerala- 695016, India
Abstract
|
|
48.
|
Investigation on the Capacity Utilization Issues in a Cattle Feed Plant
Rethish Balakrishnan, Biju Augustine P
Dept. of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, 686501, India
Dept. of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, 686501, India
Abstract
|
|
49.
|
Balancing Labor Intensive Assembly Line Using Genetic Algorithm
Jithendrababu B L,RenjuKurian, Pradeepmon T G
Dept. of Mechanical Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Dept. of Mechanical Engineering Rajiv Gandhi Institute of Technology, Kottayam, Kerala, India
Dept. of Mechanical Engineering, SNGC College of Engineering
Abstract
|
|
50.
|
Design of PLC Controlled Automatic Bag Picking Mechanism for the Packaging Unit of KMML
Raju.C, Udayakumar.S
Research Scholar, NIT,Trichy-620015, India
Assistant Professor, P.S.G College of Technology, Coimbatore, India
Abstract
|
|
51.
|
Influence of Interface Surface Geometries In The Tensile Characteristics Of Friction Welded Joints From Aluminium Alloys
Baiju Sasidharan, Dr.K.P.Narayanan, R.Arivazhakan
Dept. of Ship Technology, CUSAT Cochin, Kerala ,682 022 India
Dept. of Ship Technology, CUSAT Cochin, Kerala ,682 022 India
MME, LPSC, Thiruvananthapuram, Kerala , India
Abstract
|
|
52.
|
A Study on Drying Of Amla Using A Hybrid Solar Dryer
Sajith K. G. C. Muraleedharan
Research Scholar, Dept. of Mechanical Engineering, NIT Calicut, Kerala, 673601, India
Professor, Dept. of Mechanical Engineering, NIT Calicut, Kerala, 673601, India
Abstract
|
|
53.
|
Numerical Simulation of Flow through Mini Channels With Internal Obstructions
Midhun. P, Rahul H Kumar, K.S.Santhosh
Assistant Professor, Department of Mechanical Engg., Vidya Academy of Science and Technology, Kilimanoor, Kerala, India
PG student, Department of Mechanical Engg College of Engineering Trivandrum, India
Assistant Professor, Department of Mechanical Engg College of Engineering Trivandrum, India
Abstract
|
|
54.
|
Optimization of Surface Area of Porous Structures
Vishnu.T.V, Pradeep.M.Kamath
PG Student, Dept. of Mechanical Engineering, Govt.Engineering College,Trissur,Kerala,680009, India
Asst.Professor,Dept. of Mechanical Engineering, Govt.Engineering College,Trissur,Kerala,680009, India
Abstract
|
|
55.
|
Forced Convection In A Pipe Filled With Porous Medium
S Ashok Kumar, M R Rajkumar
College of Engineering, Trivandrum, Kerala, 695016, India
College of Engineering, Trivandrum, Kerala, 695016, India
Abstract
|
|
56.
|
Numerical and Experimental Invetigations of the Nozzle Geometry in Supersonic Mixing.
Sumesh V., Rahul S. Arackal, P. Balachandran, Z. A. Samitha, Fazil Mohammad
College of Engineering, Trivandrum, Thiruvananthapuram, Kerala 695016 India
Musaliar College of Engineering and Technology, Pathanamthitta, Kerala,689653 India
LPSC, ISRO, Thiruvananthapuram, Kerala, 695547 India
College of Engineering, Trivandrum Thiruvananthapuram, Kerala,695016 India
VSSC, ISRO, Thiruvananthapuram,Kerala,695022 India
Abstract
|
|
57.
|
Performance Analysis of Nanofluid Based Lubricant
Sajumon.K.T, Jubin V Jose, Sreejith S, Aghil V Menon, Sreeraj Kurup P N, Sarath Sasi
Assoc.prof, Dept. of Mechanical Engineering Rajiv Gandhi Institute of Technology, Kottayam, Kerala- 686501, India
Government Engineering College, Thrissur, Kerala- 680009, India
Rajiv Gandhi Institute of Technology, Kottayam, Kerala- 686501, India
Government Engineering College, Thrissur, Kerala- 680009, India
Rajiv Gandhi Institute of Technology, Kottayam, Kerala- 686501, India
Rajiv Gandhi Institute of Technology, Kottayam, Kerala- 686501, India
Abstract
|
|
58.
|
Rarefaction Effect On Fluid Flow Through Microchannel
Sunildutt
M.G University Kottayam, Kerala, 686008 India
Abstract
|
|
59.
|
Quality Estimation and Chemical Kinetic Modeling Of Bio Diesel
Arun lal A, Dr. Baiju B
Assistant Professor, John Cox CSI Institute of Technology, Trivandrum, India
Associate Professor, College Of Engineering, Trivandrum, India
Abstract
|
|
60.
|
Thermal Characterization of A Solar Parabolic Trough Collector Foradsorption Refrigeration Application System
Jijo Thomas, Jince P. Mathew, Sariga Gopan G. S, Thejas. S, G.Venugopal
B.Tech Student, Dept. of Mechanical Engg. College of Engineering, Trivandrum, Kerala, India
B.Tech Student, Dept. of Mechanical Engg. College of Engineering, Trivandrum, Kerala, India
B.Tech Student, Dept. of Mechanical Engg. College of Engineering, Trivandrum, Kerala, India
B.Tech Student, Dept. of Mechanical Engg. College of Engineering, Trivandrum, Kerala, India
Associate Professor, Rajiv Gandhi Institute of Technology, Kottyam, Kerala, India-686501
Abstract
|
|