International Conference on Energy and Environment - 2013
(ICEE 2013)
Organized by
Dept. of Civil Engineering and Mechanical Engineering
Rajiv Gandhi Institute of Technology (Govt. Engineering College)
Kottayam, Kerala-686501, India
Under Technical Education Quality Improvement Programme – Phase II
Date: 12 - 14 December 2013
SECTION- I : ENVIRONMENT
1. |
A Simple Methodology for Estimation of Queue Length
|
|
2. |
Bias correction of ANN based statistically downscaled precipitation data for the Chaliyar river basin
|
|
3. |
Assessment of Groundwater Flow Model for an Unconfined Coastal Aquifer
|
|
4. |
Evaluation of Critical Fracture Skin Porosity For Contaminant Migration In Fractured Formations
|
|
5. |
Interfacial Friction Properties of Geocell Reinforced Sand
|
|
6. |
Development of Urban Seismic Risk Assessment System
|
|
7. |
Aerobic Granulation - An Economically Viable Option for the Treatment of Wastewater
|
|
8. |
MUD Architecture
|
|
9. |
Seismic Strengthening Of Exterior RC Beam-Column Joints Byadvanced Ferrocement Jacketing
|
|
10. |
Road User Effects Model Calibration in HDM-4 – A Case Study
|
|
11. |
Integrated Remote Sensing and GIS Approach for Groundwater Exploration using Analytic Hierarchy Process (AHP) Technique.
|
|
12. |
Effect of Urbanization On Soil Erosion
|
|
13. |
Prioritisation of Road Corridors By Developing Composite Index
|
|
14. |
Pavement Distresses and Roughness Modeling – A Case Study
|
|
15. |
Trip Generation Model for the Core Area of Thiruvananthapuram City
|
|
16. |
Seismic Evaluation of Existing Buildings In Karnataka
|
|
17. |
Finite Element Analysis Of Under Water Towed Cables
|
|
18. |
Modelling Of Road Traffic Noise
|
|
19. |
Identification and Analysis of Accident Black Spots Using Geographic Information System
|
|
20. |
Development of GIS Based Disaster Risk Information System for Decision Making
|
|
21. |
Accident Prediction Models For Urban Unsignalised Intersections
|
|
22. |
An Experimental Study on Dispersive Nature of Soil
|
|
23. |
Strength and Behaviour of Geopolymer Concrete Beams
|
|
24. |
Determination of Performance Point in Capacity Spectrum Method
|
|
25. |
Fatigue Analysis Of Glass Fiber Reinforced Polymer (Gfrp) Bridge Deck Panels
|
|
26. |
Activity Based Travel Behavioural Study and Mode Choice Modelling
|
|
27. |
Impact Of The Proposed Cargo Port On The Traffic Characteristics Of Ponnani Town And Abatement Measures
|
|
28. |
Traffic Operation Plan for Tirur Municipality
|
|
29. |
Study on The Effect Of Hook Length In RC Column Subjected To Cyclic Loading
|
|
30. |
Innovative Cold Form Based Composite Section for Enhancing Sustainability in Built Environment
|
|
31. |
SHALLOW WATER BATHYMETRY USING LOG-LINEAR INVERSION TECHNIQUE: A CASE STUDY AT VIZHINJAM
|
|
32. |
Evaluation of Dynamic Modulus of Modified and Unmodified Asphalt Mixtures
|
|
33. |
A Case Study on Overlay Design Using HDM-4
|
|
35. |
Impact of Surveillance Cameras at Intersections
|
|
36. |
Design of Floating Support Structure for 5 MW Offshore Wind Turbine
|
|
37. |
Road Safety Awareness Index & Road User Behavior- A Case Study at Kazhakkoottam
|
|
38. |
Developing a Trip Production Prediction Model Based On Residential Land Use Characteristics
|
|
39. |
Waste Water Treatment by Algae
|
|
40. |
Analysis of Precast Multistoreyed Building – A Case Study
|
|
41. |
Impact Analysis of Speed Restriction Measures Using Vissim 5.40
|
|
42. |
Setting Time, Compressive Strength and Microstructure of Geopolymer Paste
|
|
43. |
Study of the Behaviour of Welded T-Joints In Hollow Circular Steel Sections
|
|
44. |
Accessibility Analysis to Public Transport – A Case Study of Thiruvananthapuram City
|
|
45. |
Application of Rapid Impact Assessment Matrix (RIAM) Method For The Feasibility Study Of A Mobility Hub in Kottayam
|
|
46. |
Development of New PCU Values and Effect of Length of Passenger Cars on PCU
|
|
47. |
Prediction of Trip Attraction Based On Commercial Land Use Characteristics
|
|
48. |
Mode Choice Modelling based on Work Trips – Artificial Neural Network Model
|
SECTION- II : ENERGY
1. |
Green House Saving Potential Of A Photovoltaic Thermal Hybrid Solar System For Residential Applications
|
|
2. |
Numerical Simulation Of Hydrogen Sorption In Metal Hydride Based Storage Bed Using Lattice Boltzmann Method
|
|
3. |
Wall Roughness Effects On Shock Boundary Layer Interaction Flows
|
|
4. |
A Review Of Green Supply Chain Management Issues In Indian Bottledwater Industry
|
|
5. |
Cost Of Pollution And Its Control In Pulp And Paper Industry
|
|
6. |
Effect Of Prandtl Number On Heat Transfer In Flow Past A Heated Cylinder
|
|
7. |
Studies On Underwater Vibration Isolation Module
|
|
8. |
Numerical Analysis On Transient Thermal Behaviour Of Charcoal Filters In Nuclear Power Plants
|
|
9. |
Transient Thermal Analysis & Hot Test Of An Ablative Cooled Thrust Chamber Of Semi Cryogenic Engine
|
|
10. |
Numerical Studies On Hydraulic Transients During Pump Startup And Coast-Down In An Adiabatic Closed Loop
|
|
11. |
Application of Simulated Annealing in Flow Shop Scheduling
|
|
12. |
Linking the Awareness Of Modern PPC Techniques With The Perceivedusefulness Of Forecasting: Empirical Findings From Indian SMES
|
|
13. |
Aerothermal Analysis of Hypersonic Flow around a Cylinder
|
|
14. |
Performance Evaluation Of Building Having Differenttypes Of Solar Shades
|
|
15. |
Development Of A Mitigation Model For Storage Facility To Reduce The Consequence Of Toxic Release
|
|
16. |
Design, Development And Testing Ofinjector Forsubsystem Development Of Semi Cryogenic Engine Thrust Hamber
|
|
17. |
Numerical Simulation Of Combustion In A Single Element H2-O2 Cryogenic Engine
|
|
18. |
Performance Studies On A Vapour Compression Refrigeration System Using Nano-Lubricant
|
|
19. |
Development of a Delay Analysis System for a railway construction Project
|
|
20. |
Evaluation of The Contributors Of OEE (Overall Equipment Effectiveness) Using Shapley Value: A Case Study
|
|
22. |
Health Monitoring Of Plate Structure Using Piezo Electric Patches And Curvature Mode Shape
|
|
22. |
A Comparative Study Of Tensile And Microstructural Characteristics Of Friction Welded Joints And Conventionally Welded Joints Of Aluminium Alloy 6061
|
|
23. |
Surface Roughness Charecterization Using Interference Fringe Analysis
|
|
24. |
Improving Competitiveness For A Rubberised Coir Mattress Company Through Cost Optimization
|
|
25. |
Ergonomic Redesign Of A Material Handling Worksystem In A Manufacturing Plant
|
|
26. |
Reducing rejection rate of castings using Simulation Model
|
|
27. |
An Experimental Investigation on The Enhancement Of Forced Onvection Heat Transfer Using Tio2-Water Nanofluids In Turbulent Regime
|
|
28. |
Experimental Analysis Of A Liquid Desiccant Dehumidifier Using Aqueous Calcium Chloride Solution
|
|
29. |
Experimental Studies Of Thermal Conductivity, Viscosity And Stability Of Ethylene Glycol Nanofluids
|
|
30. |
CFD Analysis of A Flame Deflector With Water Cooling For A Semicryogenic Engine Test Facility
|
|
31 |
Comparative Study Of Axial Heat Conduction On The Walls Of A Micro Grooved Heat Pipe
|
|
32. |
Development of an Artificial Neural Network Surface Roughness Prediction Model in Turning of AISI 4140 Steel Using Coated Carbide Tool
|
|
33. |
Evaluation Of Surface Roughness In Aluminium Alloy Using Different Cutting Conditions
|
|
34. |
Assessing The Influence Of The "Awareness Of Modern PPC Techniques" On The "Usefulness of Planning" in SMES
|
|
35. |
Layout Planning For Sustainable Development
|
|
36. |
Measuring Agility Of A Process Plant Using Comprehensive Agility Measurement Tool (CAMT)
|
|
37. |
Optimization Of Plant Layout For A State Road Transport Corporation
|
|
38. |
Influence of Use of Controlling, It Usage, Learning And Training On SME Performance
|
|
39. |
Optimization of Outbound Logistics System of Acement Manufacturing Company
|
|
40. |
A Methodology to Estimate Thermal Conductivity Using Inverse Method
|
|
41. |
Numerical Analysis of Two Phase Flow in Flat Heat Pipe
|
|
42. |
Effect of Variable Gas Orifice Geometry on Gas-On-Liquid Impinging Injectors
|
|
43. |
Numerical Investigation of Effect Of Exhaust Gas Recirculation On Compressionignition Engine Emissions
|
|
44. |
A HYBRID FRAMEWORK MODEL FOR INDIAN SUPPLY CHAIN COORDINATIONMECHANISM USING FUZZY LOGIC
|
|
45. |
Modelling of Outbound Logistics Barriers of Rubberwood Processing Industries
|
|
46. |
Productivity Gainsharing Incentive Scheme for a Spinning Mill Industry
|
|
47. |
Implementation of Six Sigma Methodology in a Blood Bag Manufacturing Company
|
|
48. |
Investigation on the Capacity Utilization Issues in a Cattle Feed Plant
|
|
49. |
Balancing Labor Intensive Assembly Line Using Genetic Algorithm
|
|
50. |
Design of PLC Controlled Automatic Bag Picking Mechanism for the Packaging Unit of KMML
|
|
51. |
Influence of Interface Surface Geometries In The Tensile Characteristics Of Friction Welded Joints From Aluminium Alloys
|
|
52. |
A Study on Drying Of Amla Using A Hybrid Solar Dryer
|
|
53. |
Numerical Simulation of Flow through Mini Channels With Internal Obstructions
|
|
54. |
Optimization of Surface Area of Porous Structures
|
|
55. |
Forced Convection In A Pipe Filled With Porous Medium
|
|
56. |
Numerical and Experimental Invetigations of the Nozzle Geometry in Supersonic Mixing.
|
|
57. |
Performance Analysis of Nanofluid Based Lubricant
|
|
58. |
Rarefaction Effect On Fluid Flow Through Microchannel
|
|
59. |
Quality Estimation and Chemical Kinetic Modeling Of Bio Diesel
|
|
60. |
Thermal Characterization of A Solar Parabolic Trough Collector Foradsorption Refrigeration Application System
|
Volume 14, Issue 5, May 2025

Disclaimer : Prospective authors should note that only original and previously unpublished research papers will be considered. Furthermore, simultaneous submissions (under consideration for publication elsewhere) are not acceptable. Submission of a manuscript is interpreted as a statement of certification that no part of the manuscript is copyrighted by any other publication nor is under review by any other formal publication. It is the primary responsibility of the author to obtain proper permission for the use of any copyrighted materials in the manuscript, prior to the submission of the manuscript to IJIRSET.