• ISSN (Online): 2319-8753
  • /
  • ISSN (Print): 2347-6710

International Journal of Innovative Research in
Science,Engineering and Technology

(A High Impact Factor, Monthly, Peer Reviewed & Referred Journal)

Impact Factor : 8.423 ijiset.com | Author submit manuscript to [email protected] ijiset.com | Fast Track Review Process ijiset.com | Digitally Signed E-Certificates will be sent immediately ijiset.com | Authors helpline: Whatsapp No: 6381907438 / Mobile No: 6381907438 ijiset.com
IJIRSET Launched Hard copy Publication and Hard copy of Certificates from Vol.4, Issue 1, January 2015 issue.

Recent News

Call for Papers

Vol. 13, Issue 3, Mar 2024
Submission :   31st Mar 2024
Notification :   24 to 36 Hours
Publication :   24 hours
E-Certificates :   Immediate

IJIRSET Citation Report

Archives

One day

National Conference

On

“Recent Trends in Mechanical Engineering & Applied Sciences 2018” (RTME & AS-2018) on 17th MAY 2018

Organized by

DEPARTMENT OF MECHANICAL ENGINEERING

1.

Study and Fabrication of Solar Powered Multiple Crop Cutter

C J Manjunatha, Manjunath K, Ashok Kumar A, Nataraja M

Assistant Professor, Dept. of Mechanical Engineering, Sha- Shib College of Engineering, Chickballapur, Karnataka, India

Assistant Professor, Dept. of Mechanical Engineering, SEA College of Engg. & Technology, Bangalore, Karnataka, India

Assistant Professor, Dept. of Mechanical Engineering, Sha- Shib College of Engineering, Chickballapur, Karnataka, India

Assistant Professor, Dept. of Mechanical Engineering, Sir M Visvesvarya Institute of Technology, Bangalore, Karnataka, India

Abstract PDF
 

2.

Fault Diagnosis in Belt Drive Transmission Using Wavelet Spectrum

Sujesh Kumar, M. Lokesha, Akshatha G K, Balaji K N, N Raghavendra, Uma Shankar

Department of Aeronautical Engineering, Mangalore Institute of Technology & Engineering, Moodbidbri, India

Department of Mechanical Engineering, Mangalore Institute of Technology & Engineering, Moodbidbri, India

Abstract PDF
 

3.

Roof Crush Analysis of Passenger Car for Vehicle Safety and Crashworthiness

Prajwal S, Ullas G, Akshay M, Syed Huzaifa, Arun R, Santhosh Gaidhankar

U.G. Student, Department of Mechanical Engineering, Sai Vidya Institute of technology, Rajankunte, Bangalore, India

Assistant Professor, Department of Mechanical Engineering, Sai Vidya Institute of technology, Rajankunte, Bangalore, India

Abstract PDF
 

4.

Computational Analysis of Fatigue Life of S-Glass/Epoxy Composite Drive Shaft

Shankaregowda K C, Sridhar H S, Ravi S M

Assistant Professor, Department of ME, SKIT Bangaluru, India

Assistant Professor, Department of ME, SIT Mangaluru, India

Abstract PDF
 

5.

To Study the Failure Mode and Effective Analysis of Trailing Arm Weldment

Prakash b Ramanna Bandi, Vijayavithal Illa, Navinesh B C

Asst. Professor, Department of Mechanical Engineering, ICEAS, Engineering College, Bengaluru, Karnataka, India

Asst. Professor, Department of Mechanical Engineering, ICEAS, Engineering College, Bengaluru, Karnataka, India

Abstract PDF
 

6.

Design and Development of Air Screwing Watercar

Naveen Kumar Pattar, Abhishek C Yaram, Shashikumar M

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

PG Student, Department of Mechanical Engineering, SIT, Tumakuru, Karnataka, India

PG Student, Department of Mechanical Engineering, SIT, Tumakuru, Karnataka, India

Abstract PDF
 

7.

Study of Screw Compressor Package and Design of Throttle Lever Action

Nataraja M, Kumarswamy R, Manjunath K, Shivakumar S

Assistant Professor, Department of Mechanical Engineering, Sir M Visvesvarya Institute of Technology, Bangalore, Karnataka, India

Assistant Professor, Department of Mechanical Engineering, Sir M Visvesvarya Institute of Technology, Bangalore, Karnataka, India

Assistant Professor, Department of Mechanical Engineering, SEA College of Engg.. & Technology, Bangalore, Karnataka, India

Assistant Professor, Department of Mechanical Engineering, Sir M Visvesvarya Institute of Technology, Bangalore, Karnataka, India

Abstract PDF
 

8.

Design and Analysis of Mono-Composite Leaf Spring for Light Weight Vehicles

Sachin Malavade, Sagar H N, Koteshwar K, Ullas G R, Venugopal M G

Assistant Professor, Department of Mechanical Engineering, PNS Institute of Technology, Nelamangala, Bangalore, India

Assistant Professor, Department of Mechanical Engineering, Sri Krishna Institute of Technology, Bangalore, India

U.G. Student, Department of Mechanical Engineering, PNS Institute of Technology, Nelamangala, Bangalore, India

Abstract PDF
 

9.

Optimization of Bumper Column of a Low Speed Vehicle

Sagar H N, Pavana Kumara B A, Manjunath Siddappa Bailwad, Punith HB, Harath HB

Assistant Professor, Department of Mechanical Engineering, Sri Krishna Institute of Technology, Bangalore, India

U.G. Student, Department of Mechanical Engineering, PNS Institute of Technology, Bangalore, India

Abstract PDF
 

10.

Design and Testing of Magneto-Rheological Damper for Vehicle Suspension

Anirudh BA, Ghanashyam US, Nagesh N, Rahul S, Deepak C, Ram Rohit V

U.G. Student, Department of Mechanical Engineering, Sai Vidya institute of Technology, Bengaluru, India

Assistant Professor, Department of Mechanical Engineering, Sai Vidya institute of Technology, Bengaluru, India

Assistant Professor, Department of Mechanical Engineering, BMS College of Engineering, Bengaluru, India

Abstract PDF
 

11.

Design and Thermal Analysis of Power Supply Module

Manish N, Ashish V S

Department of Mechanical Engineering, Sai Vidya Institute of Technology, Bangalore, India

Abstract PDF
 

12.

Investigation of Fuel Properties of Neem Oil Methyl Ester and Their Blends with Diesel and Kerosene

Appese .S.D, B.R.Hosamani, Sreenivasan .A

Assistant Professor, Dept. of Mech. Engineering, SKIT, Chikkabanavara, Hesaraghatta main road Bengaluru, India

Professor, Dept. of Automobile Engg, BLDEA's VP Dr PGH College of Engineering and Technology, Vijayapur, India

Professor & HOD, Dept of Mech. Engineering, SKIT, Chikkabanavara, Hesaraghatta main road Bengaluru, India

Abstract PDF
 

13.

Effect of Compression Ratio on Performance Characteristics of Diesel Engine Run by Biodiesel Derived From Neem & Pongamia

Rajeesh.S, S V Prakash, Nagesh S N and Girish V Kulkarni

Research scholar, Ramaiah Institute of Technology, Bangalore, VTU Belgaum, India

Professor & Dean, Department of Mechanical Engineering, Sri Krishna Institute of Technology, Bangalore, India

Assistant Professor, Department of Mechanical Engineering, Ramaiah Institute of Technology, Bangalore, India

Abstract PDF
 

14.

Natural Convection in A Square Cavity with Partitions from Top and Bottom Adiabatic Walls

B. M. Krishne Gowda, R. Nagaraja , Aswatha, K. N. Seetharamu

Department of Mechanical Engineering, Sri Krishna Institute of Technology, Bangaluru, India

Department of Tool Engineering, Government Tool Room and Training Centre, Bangaluru, India

Department of Mechanicals Engineering, Bangalore Institute of Technology, Bangaluru, India

Department of Mechanical Engineering, PES University, Bangaluru, India

Abstract PDF
 

15.

Performance Characteristics of Neem Bio Fuel Blends with Kerosene Using Domestic Kerosene Stove

Appese .S.D, Naveen Kumar Pattar, Dinesh P, Shankregowda, Krishnegowda.B.M

Assistant Professor, Department of Mechanical Engineering, SKIT Chikkabanavara, Hesaraghatta main road Bengaluru, India

Abstract PDF
 

16.

Validation Study and CFD Analysis of K- ε Model by Using Discrete Jet Swirler

Prasanna Gouda, Sagar H N, Doreswamy G V, B M Krishne Gowda

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

Abstract PDF
 

17.

The Emission Analysis and Comparison of Mahua Oil and Neem Oil Are Blends with Diesel Fueled In CI Engine

Appese .S.D, Avinasha P.S, B.R.Hosamani

Assistant Professor, Department of Mechanical Engineering, SKIT Chikkabanavara, Hesaraghatta main road Bengaluru, India

Assistant Professor, Department of Mechanical Engineering, AIT Engineering College Devanahalli, Bengaluru, India

Professor, Department of Automobile Engineering, BLDEA's VP Dr PGH College of Engineering and Technology Vijayapur-03 /VTU Belagavi, Karnataka, India

Abstract PDF
 

18.

The Performance Analysis and Comparision of Mahua Oil and Neem Oil are Blends with Diesel Fueled in CI Engine

Appese .S.D, Avinasha P.S, B.R.Hosamani

Assistant Professor, Department of Mechanical Engineering, SKIT Chikkabanavara, Hesaraghatta main road Bengaluru, India

Assistant Professor, Department of Mechanical Engineering, AIT Engineering College Devanahalli, Bengaluru, India

Professor, Department of Automobile Engineering, BLDEA's VP Dr PGH College of Engineering and Technology Vijayapur, India

Abstract PDF
 

19.

Solar Tree Exploring New Form Factors of Organic Solar Cells, the Benefits and Applications of Solar Tree with Natural Beauty

Naveen Kumar Pattar, Abhishek C Yaram, Sreenivasan .A

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

PG Student, Department of Mechanical Engineering, SIT, Tumakuru, Karnataka, India

Professor & HOD, Department of Mechanical Engineering, SKIT, Bengaluru, India

Abstract PDF
 

20.

A Study of Compact Test and Stress Intensity Factor on Developed Welded Duplex Stainless Steel

Balasubramaniam N S, Dr. P D Sudersanan, Dr. H G Shenoy, Dr. Aprameyan S

Asst. Professor, Department of Mechanical Engineering, Dr.T.Thimmaiah Institute of Technology, K.G.F, India

HOD & Professor, Department of Mechanical Engineering, Dr.T.Thimmaiah Institute of Technology, K.G.F, India

Professor, Department of Mechanical Engineering, Dr.T.Thimmaiah Institute of Technology, K.G.F, India

HOD & Professor, Department of Mechanical Engineering, C.Byregowda Institute of Technology, Kolar, India

Abstract PDF
 

21.

HVOF Sprayed Coating's (WC-Co Ni Cr Si ) to Conduct the Erosion Test

Navinesh.BC, Prathap.D, Praveen.D, Sanjay.S, Veerendra Patel, Dr.B.Somasundaram

Department of Mechanical Engineering, SKIT, School of Mechanical, REVA University Bangalore, India

Abstract PDF
 

22.

Comparative Study of Erosion for the HVOF Spray Coating (WC-NiCrFeCo) with Substrate Metal SS-306

Navinesh.BC , Harendra Kumar.H.V, Dinesh.R, Gokul Krishna.N, Harshith, Manjunatha.S

Department of Mechanical Engineering, SKIT, School of Mechanical, REVA University Bangalore, India

Abstract PDF
 

23.

SOLAR POWERED SEED PLANTER CONTROLLED BY USING BLUETOOTH

Bharat Yadav, Dr. K M Kenchi Reddy

UG Student, Department of Mechanical Engineering, Sri Krishna Institute of Technology, Chikkabanavara, Bangalore, India

Professor, Department of Mechanical Engineering, Sri Krishna Institute of Technology, Chikkabanavara, Bangalore, India

Abstract PDF
 

24.

Development and Evaluation of Mechanical Properties of Aluminium Reinforced With Graphite MMC's

Madhukumar K, Nataraja M, Sathwik Nag C V, Purushotham Shenoy K

Assistant Professor, Department of Mechanical Engineering,, Sir M Visvesvaraya Institute of Technology, Bangalore Karnataka, India

Assistant Professor, Department of Mechanical Engineering,, Sir M Visvesvaraya Institute of Technology, Bangalore Karnataka, India

U.G Student, Department of Mechanical Engineering, Sir M Visvesvaraya Institute of Technology, Bangalore Karnataka, India

U.G Student, Department of Mechanical Engineering, Sir M Visvesvaraya Institute of Technology, Bangalore Karnataka, India

Abstract PDF
 

25.

Erosion of HVOF Sprayed ( CrC-Ni Cr Fe Si )Coatings of Comparison with Substrate Metal SS-306

Navinesh.BC , Sreedhara.C.S, Yogesh.N.R, Abhilash.R, Subramanya M Nayak, Dr.B.Somasundaram

Department of Mechanical Engineering SKIT, School of Mechanical REVA University Bangalore, India

Abstract PDF
 

26.

Fabrication and Development of 4 Stroke Cultivation Vehicles for Agricultural Applications

Arjun S, Chandan m v, Rahul D, Dinesh Kumar K S , Kumar R

Assistant Professor, MED, SVIT, Bengaluru, India

Students of MED, SVIT, Bengaluru, India

Abstract PDF
 

27.

Poka-yoke System for Transfer Robot's Crossbar – H.D.A Locking assembly

Gnanasundar E S, Prasanna Gouda, Sagar Hn

Asst. Professor, Department of Mechanical Engineering, PNS Institute of Technology, Bengaluru, Karnataka, India

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

Abstract PDF
 

28.

HVOF Sprayed Coating's (WC-CoNiCrSi ) to Conduct the Erosion Test

Navinesh.BC, Prathap.D, Praveen.D, Sanjay.S, Veerendra Patel, Dr.B.Somasundaram

Department of Mechanical Engineering, SKIT, School of Mechanical, REVA University Bangalore, India

Abstract PDF
 

29.

Investigation on Mechanical and Tribological Properties of A356 Reinforced with bottom ash MMC

Sridhar H S, T.B Prasad, Batluri Tilak Chandra, Nithya aparna.B, Harendra Kumar.H.V

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

Professor, Department of Mechanical Engineering, S.S.I.T, Tumkur, Karnataka, India

Assistant Professor Department of Mechanical engineering, S. S.I.T, Tumkur, Karnataka , India

Abstract PDF
 

30.

Effect of Heat Treatment on Tribological properties of A356 Reinforced with bottom ash Metal Matrix Particulate Composite

Sridhar H S, Chethan S, Karthik S, Naveen N, Sudarshan H N

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

Assistant Professor, Department of Mechanical Engineering, S.V.V.I.T Bangalore, Karnataka, India

UG Student, Sri Vidya vinayaka Institute of Technology Bangalore, Karnataka, India

Abstract PDF
 

31.

XRD and SEM Analysis of A356/BA Composites Fabricated by Stir Casting Method

Sridhar H S, T.B Prasad, Chandraiah M T, Uppur M Sumukha Kalkur, Kiran Kumar B K

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India.

Professor, Department of Mechanical Engineering, S.S.I.T, Tumkur, Karnataka, India

UG scholar, Sri Krishna Institute of Technology Bangalore, Karnataka, India

Abstract PDF
 

32.

The Influence of Electroless Copper Coatings on A356 Alloy Reinforced With Bottom Ash Partials.

Sridhar H S, Nithya aparna.B, Pramod S N, Aditya N, Sachin H N

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

UG scholar in Sri Krishna Institute of Technology Bangalore, Karnataka, India

Abstract PDF
 

33.

Tensile and Hardens Testing of Aluminium Alloy Composites Reinforced with Alumina Nanoparticles

Vijaya.B, Chetan Y, Murali Krishna R C , Chetan reddy K R, Bharath R

Associate Professor, Department of Mechanical Engineering Sai Vidya Institute of Technology, Bangalore, Karnataka. India

UG Students, Department of Mechanical Engineering, Sai Vidya Institute of Technology, Bangalore, Karnataka. India

Abstract PDF
 

34.

Microstructure and Microhardness of Plasma Sprayed NiCrBSi/Flyash Composite Coatings

Nagabhushana.N

Assistant Professor, New Horizon College of Engineering, Bengaluru, Karnataka, India

Abstract PDF
 

35.

Preparation and Characterization of Poly Lactic Acid (PLA) & Acrylonitrile Butadine Styrene (ABS) Using Different 3D Printing Angles

Raghavendra MJ, Girish KV, Naveen TR, Ravikumar L

Department of Mechanical Engineering, Sai Vidya Institute of Technology, Bengaluru, Karnataka, India

Abstract PDF
 

36.

Some Studies on Shielded Metal Arc Welding Hardfacing on Mildsteel

Chowda Reddy C, Dr. K M Kenchi Reddy, Dr. C T Jayadeva, M S Satish, Chandrashekar K M

Assistant Professor, Department of Mechanical Engineering, C Byregowda Institute of Technology-Kolar, India

Professor, Department of Mechanical Engineering, Sri Krishna Institute of Technology- Bengaluru, India

Principal, Adichunchanagiri Institute of Technology-Chikmagalur, India

Associate Professor, Department of Mechanical Engineering, C Byregowda Institute of Technology-Kolar, India

Assistant Professor, Department of Mechanical Engineering, C Byregowda Institute of Technology-Kolar, India

Abstract PDF
 

37.

Wear Testing of Aluminium Alloy composites reinforced with Alumina Nanoparticles by Taguchi method

Vijaya.B, Dhanush U, Kishan Kumar E, Praveen Pawar, Vinay Y S

Associate Professor, Department of Mechanical Engineering, Sai Vidya Institute of Technology, Bangalore, Karnataka. India

UG Students, Department of Mechanical Engineering, Sai Vidya Institute of Technology, Bangalore, Karnataka. India

Abstract PDF
 

38.

Characteristic Observation of Mechanical and EMI Shielding Property of ABS

Pradeep L C, Navinesh B C

Assistant Professor, Department of Mechanical Engineering, Sambhram Institute of Technology, Bangalore, India

Abstract PDF
 

39.

The Influence of the Mechanical Properties of Gravity Die Cast, Grain Refined and 39 Modified A357 Reinforced With Triple Size Silicon Carbide and Graphite

Sreenivasan A, Yathiraj K, Atul S Bhatt, Arun B, Chandan K, Chethan C

Department of Mechanical Engineering, Sri Krishna Institute of Technology, Bengaluru, Karnataka, India

Abstract PDF
 

40.

Two Wheel Vehicle Self-Balancing Using Gyroscope

Santhosh Gaidhankara, Chandan G.S , Adithya Srinivas K.V , Abhisheka , Naveen Kumar V

Assistant Professor, Department of Mechanical Engineering, Sai Vidya Institute of Technology, Rajanukunte, Bengaluru, India

Students, Department of Mechanical Engineering, Sai Vidya Institute of Technology, Rajanukunte, Bengaluru, India

Abstract PDF
 

41.

Traffic Signal Controller Using Magnetic Lavetation Wind Turbine

Gnanasundar E S, Shibin Benchamin, Ganesh Arabhave, Dilip kumar.S, Somashekar D S

Assistant Professor, Department of Mechanical Engineering, PNS Institute of Technology, Nelamangala, Bangalore, India

U.G. Student, Department of Mechanical Engineering, PNS Institute of Technology, Nelamangala, Bangalore, India

Abstract PDF
 

42.

Smart Helmet Using GSM &GPS Technology

Santosh S.G, Mithun Kumar T K, Trilok Narayan Sah, Amit Kumar, Niranjan S

Assistant Professor, Department of Mechanical Engineering Sai Vidya Institute of Technology, Bangalore, Karnataka, India

UG Students, Department of Mechanical Engineering, Sai Vidya Institute of Technology, Bangalore, Karnataka, India

Abstract PDF
 

43.

Pneumatic Shearing Machine

Pramod S N ,Vinay A M, Amith Sreenivas, Gireesh.S Manoj.J

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

8th semester student, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

Abstract PDF
 

44.

Novel Hybrid Electricity Generation Technique using Solar and TEG by Waste Heat Recovery

Pramod S N , Bharath S Suryavamshi, Bharath Kumar K G, Karthik C N, Madhusudhan

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

8th semester student, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka,

Abstract PDF
 

45.

Conductivity Measurements and Thermodynamical Response of Optical-Birefringence of Reentrant Smectic Phase of Liquid Crystalline Materials

Dr.T.N. Govindaiah, B. N. Ramakrishna & Dr Manju M

Research Centre, P G Dept. of Physics, Govt. College (Autonomous), Mandya, India

Department of Physics, Government College for Women, Mandya, India

Department of Chemistry, Sri Krishna Institute of Technology, Bangalore, India

Abstract PDF
 

46.

Micro Structural Parameters Studies on Sodium Sulphate Doped HPMC Polymers

H T Ananda, Thejas G Urs, R Somashekar, Dr.Manju M

Department of Physics, Government College (Autonomous), Mandya, Karnataka, India

Department of Studies in Physics, Manasagangotri, University of Mysore, Mysore, India

Dept. of Chemistry, Sri Krishna Institute of Technology Bangalore, India

Abstract PDF
 

47.

Nature inspired Synthesis of Blue Emitting Mn2+Doped ZnAl2O4 Nano Ceramics

S. Ravi, D.Prakashbabu, S.Ponkumar

Department of Physics, Sri Krishna Institute of Technology, Bangalore, India

School of Physics, Reva University, Kattigenahalli, Bangalore, India

Department of Physics, Thiruvalluvar Government Arts College, Rasipuram, India

Abstract PDF
 

48.

Optical Birefringence Studies on Cholesteric and Induced Smectic Phases of Ternary Mixture of Liquid Crystalline Materials

Dr T.N. Govindaiah, B. N. Ramakrishna, Dr Manju M

Research Centre, P.G. Dept. of Physics, Govt. College (Autonomous), Mandya, India

Department of Physics, Government College for Women, Mandya, India

Department of Chemistry, Sri Krishna Institute of Technology, Bangalore, India

Abstract PDF
 

49.

Antimicrobial Studies Of Copoly(N-Vinyl Pyrrolidone – Dimethyl Amino Ethyl Methacrylate)

Hemalatha P, M K Veeraiah, K V Anasuya, Anupama C, Manju M

Asst. Prof., Dept of Chemistry, Sri Siddhartha Institute of Technology, Tumkur, Karnataka, India

Principal, Sri Siddhartha Institute of Technology, Tumkur, Karnataka, India

Asst. Professor, Department of Chemistry, Govt. First Grade College, Tumkur. Karnataka, India

Asst. Professor, Department of Bio technology, Siddaganga Institute of Technology, Tumkur, Karnataka, India

Professor, Department of Chemistry, Sri Krishna institute of Technology, Bengaluru, Karnataka, India

Abstract PDF
 

50.

Hydrogen Bonding Interaction Mediate the Phase Behaviour of an MMA/2-EOEMA Copolymer with P4VPh Blends

Dr.Manju M, Dr.Veeraiah M.K, Dr.Shankara B.S, Dr.Prasannakumar S, Dr.Hemalatha P

Department of Chemistry, Sri Krishna Institute of Technology, Bangalore, India

Department of Chemistry, Sri Siddhartha Institute of Technology, Tumkur, India

Suntech Paints, Yeshwanthpur, India

Abstract PDF
 

51.

Acetylene as an Alternate Fuel in Modified 4-Stroke Spark Ignition Engine

Nataraja M, Kiran Kumar M, Manjunath K, Madhukumar K.

Assistant Professor, Department of Mechanical Engineering, Sir M Visvesvaraya Institute of Technology, Bangalore, Karnataka, India

Associate Professor, Department of Mechanical Engineering, Sir M Visvesvaraya Institute of Technology, Bangalore, Karnataka, India

Assistant Professor, Department of Mechanical Engineering, SEA College of Engg.. & Technology, Bangalore, Karnataka, India

Assistant Professor, Department of Mechanical Engineering, Sir M Visvesvaraya Institute of Technology, Bangalore, Karnataka, India

Abstract PDF
 

52.

Evaluation of Tribological Properties of Al 6061 Reinforced With B4C Particulate composites

Santhosh T U , Dr. Hemanth Kumar T R, Dr. Siddesh Kumar N G, Sridhar H S

Department of Mechanical Engineering, Shridevi Institute of Engineering and Technology, Tumkur, Karnataka, India

Department of Industrial Engineering and Management, Sri Siddhartha Institute of Technology, Tumkur, Karnataka, India

Department of Mechanical Engineering, Channabasaveshwara Institute of Technology, Tumkur, Karnataka, India

Department of Mechanical Engineering, Sri Krishna Institute of Technology, Chikkabanavara, Bangalore, Karnataka, India

Abstract PDF
 

53.

Optimization of Cutting Parameters for Surface Roughness and MRR in CNC Turning of EN 14 Steel

Ravi Kumar, Dr. G Bala Kumar, S B Halesh

Assistant Professor, Department of Mechanical Engineering, Sambhram Institute of Technology, Bangalore, Karnataka, India

Associate Professor, Department of Mechanical Engineering, Sir M Visvesvaraya Institute of Technology, Bangalore, Karnataka, India

Associate Professor, Department of Mechanical Engineering, Sir M Visvesvaraya Institute of Technology, Bangalore, Karnataka, India

Abstract PDF
 

54.

Development of Advanced Pneumatic Lifting and Ground Clearance Technique in Car

Jagadeesh H, Navinesh B C

Assistant Professor, Department of Mechanical Engineering, Sambhram Institute of Technology, Bengaluru, India

Abstract PDF
 

55.

Valueless Pulse Jet Engine

Pradeep L C, Navinesh B C

Assistant Professor, Department of Mechanical Engineering, Sambhram Institute of technology, Bangalore, India

Abstract PDF
 

56.

Characterization of Aluminium 7075-Beryl Metal Matrix Composites by Different Corrosion Tests in Sodium Hydroxide Medium

Naddoni Sachin Govind., H.V.Jayaprakash, P.V.Krupakara

Research Scholar, Department of Chemistry, Sri Siddhartha Institute of Technology, Maralur, Tumakuru, India

Assistant Professor, Department of Chemistry, Sri Siddhartha Institute of Technology, Maralur, Tumakuru, India

Vice-Principal and Professor of Chemistry, Cambridge Institute of Technology, North Campus, Bangalore, India

Abstract PDF
 

57.

Synthesis, characterization of metal complexes of 2-furoic 9-anthracenecarboxy hydrazone and 1,10 phenonthroline with cobalt(II) salt and their biological applications

Fernandes Anil Juje, Dr.H.Vjayaprakash

Research scholar, Sri Siddhartha Institute of Technology, Sri Siddhartha Academy of Higher Education, Tumakuru, Karnataka, India.

Professor, Sri Siddhartha Institute of Technology, Sri Siddhartha Academy of Higher Education, Tumakuru, Karnataka, India

Abstract PDF
 

58.

Study of Mechanical Properties of Grain Refined and Modified Al-Si-Mg Alloy (A357) Gravity Die Cast Reinforced with Graphite and Dual Size Alumina

Pramod S N

Assistant Professor, Department of Mechanical Engineering, S.K.I.T Bangalore, Karnataka, India

Abstract PDF
 

59.

Design of Conveyor Drums for an Iron Ore Terminal

Ravi S.M, Suma Gurulingaiah Charantimath, Sridhar.H .S, Shankaregowda.KC

Assistant Professor, Dept. of Mechanical Engineering, S.I.T , Valachil, Mangaluru, India

Assistant Professor, Dept. of Electronics & Communication Engineering, P.D.I.T, Hosapet, Karnataka, India

Assistant Professor, Dept. of Mechanical Engineering, S.K.I.T, Banglore, Karnnataka, India

Abstract PDF